justin
总版主
总版主
  • 注册日期2014-05-08
  • 粉丝8
  • 发帖数333
  • 个人主页http://www.bbsmachine.com
  • QQ931858867
  • 阿里旺旺
  • 家乡河南 平顶山 叶县
  • 铜币501203枚
  • 贡献10004次
  • 鲜花10031朵
  • 社区居民
  • 忠实会员
  • 优秀斑竹
  • VIP会员
  • 原创写手
  • 荣誉会员
阅读:551回复:0

超细球磨机英文介绍

楼主#
更多 发布于:2014-09-28 16:54
超细球磨机英文介绍

一、超细球磨机应用领域:
软质材料:方解石、大理石、石灰石、高岭土、石膏、重晶石、粉煤灰、矿渣等。 硬质材料:碳化硅、棕刚玉、莫来石、超细水泥、锆英砂、红柱石、莫来石、耐火材料等。
高纯材料:石英、长石、α-氧化铝、玻璃微珠、荧光粉等。 金属材料:锌粉、铝粉、铁粉、钼粉等。

二、超细球磨机特点:

a.
进行创新设计,粉碎效率大大提高,磨介配比科学,可有效地生产出大量微细粉。

b.可根据物料不同,选用相应衬板和磨介,保证产品的纯度及白度。


c.系统设计更加合理,土建及配套设备投资比其它球磨分级生产线降低50%。


d.设备故障率低,运转稳定;系统采用智能变频控制,自动化程度高;负压流场设计,生产环境优良。


e.生产能力大,可承接年产0.5~50万吨生产线工程。

超细球磨机技术与自分流式微粉分级技术完美结合,组成新型节能、高效、环保的超细磨粉生产线。

1
、新一代超细球磨分级生产线突出特点是比其它球磨分级生产线在节能技术、分级精度上取得革命性进步和突破,比其它球磨分级生产线及其它类磨机节能40%以上。

2、一次性分级细度300~2500目任调,加配一套分级机系统,经二次分级,细度可达d97≤2um(6250目),达到目前国内外干法分级最高水平。


3、采用最新的自分流高浓相分级技术用于超细球磨分级生产线做到:分级精度高,切割点准确;处理量大,LHB系列分级机最大单机处理量可达100t/h;能耗低,同样的处理量,能耗仅为其它分级机的40%;分级效率高,同样的处理量,细粉提取率比其它分级机提高50%。

Superfine Ball Mill
Longding superfine ball mill is a kind of new type and high-efficient powder and superfine powder processing machinery which is used for grinding the medium and low-hard material that Moh's hardness is below 6, humidity is less than 8%, and non-flammable non-explosive minerals. The classified powder could be adjusted between 300 and 2500mesh. The fineness will be better and could meet the requirements from different customers.
Superfine ball mill applications: Soft materials: Calcite, marble, limestone, kaolin, gypsum, barite, fly ash, slag, etc. Hard materials: Silicon carbide, corundum, superfine cement, zircon sand, andalusite, refractory, etc. Metallic materials: Zinc powder, aluminum powder, iron powder, molybdenum powder, etc. High purity materials: Quartz, feldspar, alpha-alumina, glass beads, phosphor, etc.
Characteristics of Longding superfine ball mill:
1Different design from traditional cement and mining processing, and in line with the requirements of different superfine material feeding and processing.
2Optimize length-diameter ratio and liner and the shape and the material for grinding medium to avoid over-grinding and achieve the best effect of grinding. Optimize aperture ratio and design of grate board, and improve the fineness by using lesser grinding medium.
3For hard minerals, adopt Non-iron pollution design. Use alumina ceramics, quartz, silex and other special
material for liner and grinding medium.
4Optimize the matching of the energy consumption and grinding drive, reduce energy consumption. Form a closed system with classifier, negative pressure conveying and less dust.
喜欢0 评分0
www.bbsmachine.com, 机械论坛,用❤打造机械人学习的家园TEL:15938731655
游客

返回顶部